90 Fachbetrieb nach WHG von der TÜV NORD Systems GmbH & Co. KG betreut DIBt Berlin steel troughs guidelines TüV-Nord systems MVV TB Nr. C2.15.12 128 Explanations see practical informations on page 6 and 84! ✔ ✔ ✔ ✔ SAFETY UNDERBENCH CABINETS Whole construction tested and approved by an authorized materials testing institute as per DIN EN 14470-1 (type 90) with a fire resistance > 90 minutes GS-approved safety (GS-sign) Insulation according to DIN 4102 Outer body made from powder-coated sheet steel in • RAL 7035 - light grey Inner body made from HPL-coated sheets - RAL 7035 Automatic thermal closing mechanism if fire occurs • Door / drawer after temperature increase to ≤50°C and • Inlet and outlet channels after temperature increase to 70°C (±10°C) DN 80 ventilation connection for exhaust air extraction in the back wall Operation complies with TRGS 510 (approved even without exhaust air connection!) Ground connection in accordance with TRBS 2153 (avoidance of sources of ignition) Markings according to DIN EN 14470-1 / TRGS 510 / ISO 3864 / ASR A1.3 Door / drawer* with cylinder lock Door type FT hinged right as standard Inner width with pulled-out drawer approx. 250 mm door hold-open device (only FT) Approved for the storage of flammable liquids at the workplace as per DIN EN 14470-1 (type 90) and TRGS 510, annex 1. Allows hazardous substances to be stored where they are used: under the fume cupboard, workbench, etc. With inner fittings: AUS Type 90 / 600-500 FT 1 x base sump tray (sump capacity 12 liters) as per WHG - Ü-sign according to StawaR 1 x perforated cover plate as 1st storing level AUS Type 90 / 600-500 SF 1 x base sump tray (sump capacity 12 liters) as per WHG - Ü-sign according to StawaR 1 x perforated cover plate as 1st storing level AUS Type 90 / 600-500 FT, Article no. B80-2897-G AUS Type 90 / 600-500 SF, Article no. B80-2895-G ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ AUS TYPE 90 / 600-500 AS PER DIN EN 14470-1 (TYPE 90) Model AUS Type 90 / 600-500 FT AUS Type 90 / 600-500 SF External dimensions W x D x H (mm) 577 x 500 x 600 577 x 500 x 600 Internal dimensions W x D x H (mm) 485 x 362 x 514 485 x 362 x 514 Door hinged right 1 - Drawer - 1 Weight (kg) 89 88 Outer body: RAL 7035 - light grey Material inner fittings Article no., door / drawer: RAL 7035 - light grey sheet steel B80-2897-A B80-2895-A Article no., door / drawer: RAL 7035 - light grey stainless steel V2A B80-2921-A B80-2922-A Article no., door / drawer: RAL 1007 - daffodil yellow sheet steel B80-2897-G B80-2895-G Article no., door / drawer: RAL 1007 - daffodil yellow stainless steel V2A B80-2921-G B80-2922-G Accessories Material Article no. Article no. Shelf sheet steel B80-2933-A - Shelf stainless steel V2A B80-2934-A - additional pull-out shelf sheet steel - B80-2929-A additional pull-out shelf stainless steel V2A - B80-2930-A Socle height 35 mm sheet steel B80-2931-A B80-2931-A Socle, perforated height 35 mm sheet steel B80-2932-A B80-2932-A AUS Type 90 / 600-500 FT, Article no. B80-2897-G, with additional shelf, available as accessory * max. load 30 kg with uniformly distributed load Extraction fans please see page 136!
RkJQdWJsaXNoZXIy NzgwNTU=