Legal basis 2 GHS 01 GHS 02 GHS 03 exploding flame flame bomb over circle GHS 04 GHS 05 GHS 06 gas cylinder caustic effect death‘s head GHS 07 GHS 08 GHS 09 exclamation health environment point hazard Existing type tests are replaced by a declaration of conformity (UHP) of the manufacturer; collection systems with a sump capacity up to 1000 liters have to be manufactured according to the steel trough guidelines (StawaR). Beyond that general technical approvals, general type approvals or European technical evaluations are granted by DIBT for products which do not correspond to the steel trough guidelines and for collection systems made from plastic. With the regulation (EC) No. 1272/2008 a common European labeling system based on the Global Harmonized System (GHS) has been introduced. The CLP / GHS is mandatory since 01.06.2015 and to be applied for all substances. The regulation (EC) No 1907/2006 of December 18, 2006 is directly related to CLP and is among others, intended for the registration and evaluation of chemical substances. REACH collects data for health and safety risks of chemical substances as a basis for e.g. safety data sheets, risk assessments. 1. Important laws and regulations 2. Specialized company 3. Water-endangering liquids very hazardous (severely) WGK 3 hazardous WGK 2 slightly hazardous WGK 1 Facilities for the storage of water-endangering substances can only be manufactured and installed by specialized manufacturer in accordance with WHG. For the production a manufacturer qualification according to DIN EN 1090-2 EXC2 (formerly DIN 18800-7 Class C) is necessary. 5. Approvals 6. CLP and GHS 7. REACH DIBt Berlin Approval-No.: Z-38.5-122 General Technical Approval DIBt Berlin steel troughs guidelines TüV-Nord systems MVV TB Nr. C2.15.12 Indication Hazard classes 4. Sump capacity The sump device has to collect 10% of the total media stored above, but at least the contents of the largest stored container. In water protection areas 100% of the stored media have to be collected, assuming that storage is permitted. Fachbetrieb nach WHG von der TÜV NORD Systems GmbH & Co. KG betreut ADR Regulations for the transport of dangerous goods ASR Guideline for workplaces AwSV Regulation on facilities handling water-endangering substances BetrSichV Regulation for industrial safety BImSchG Federal Immission Control Act BImSchV Federal Immission Control Ordinance (e.g. 4. BImSchV, 12. BImSchV) ChemG Chemicals Act CLP Regulation on the classification, labeling and packaging of substances and mixtures DGUV German Social Accident Insurance GefStoffV Ordinance of Hazardous Substances LBauO Construction regulations of the countries LöRüRL Fire water-containment guidelines REACH Registration, evaluation, authorization and restriction of chemical substances StawaR Steel trough guidelines TRBS Technical rules for operational safety TRGS Technical Regulation for hazardous substances (f.e. TRGS 509, 510) TRwS Technical Rule for water-endangering substances WHG German Water Management Act Shortcut Law / Regulation According to the new regulation on hazardous substances 2010 a near-term adapting to CLP- and REACH-regulation has succeeded. The new regulation on hazardous substances is absolutely hazard-minded. The determination of precautionary measures is exclusively a result of a risk assessment. This can be easily derived from the following chart: Hazardous substances Hazard Measures Task Regulation on hazardous substances (GefStoffV) new 2010! LACONT GmbH Umwelttechnik
3 Checklist for storage of water-endangering and/or flammable liquids Clear classification of the substances be stored Flammable liquids Water-endangering liquids / flammable liquids • Site • F90-system, F90-wall or at least 10 meters distance • Ventilation • Ex-proof electrical equipment • Official and/or fire fighting requirements • Fire protection requirements (fighting system, fire detection, fire fighting water retention...) The planning and realization of hazardous substances storage requires the reconcilement of countless individual aspects. For example type and quantity of stored hazardous substances, local conditions and available space, the legal regulations and official requirements, and not at least the available budget has to be brought to a common denominator. Our checklist is intended to help you with this. Please note that we are only able to render assistance at this. Each case must be considered separately. We are pleased to assist you gladly. Please let us know about used container sizes, pallet sizes, required load capacity or compartment height. This might be helpful to submit an offer. • Resistance of the trays material (e.g. storage of aggressive media) • Type of containers (small containers, 200 liter drums, IBC…) • Quantity of containers • Sump capacity • Walk-in or shelving storage • Available or planned handling equipment • Water protection area • Official requirements Water-endangering liquids Checklist for „Your hazardous substances storage“ LACONT GmbH Umwelttechnik Symbol keys (explanations): Indoor storage Outdoor storage Indoor or outdoor storage Bearing constitution and storability: *) Please observe the current legal requirements, materials safety data sheets and consult the previously mentioned practical information. suitable *) limited suitability *) unsuitable ✔ ✘ ✘ ✔ ✔ ✔ ✘ ✔ §
• • • • • • • For the storage of water-endangering and flammable liquids Base sump tray made from 3 mm sheet steel Base sump tray according to WHG - Ü-sign according to StawaR Removable galvanized grid Ground clearance 100 mm for internal transport Corrosion protection by primer coating and painting or by fire-galvanized sheet steel PE inserts are available for all models for the storage of acids and alkalis Drum stands can be combined with: • • • • • Compact sump pallets Water protection pallets Hazardous substance stations Floor safety elements Drum carts Drum stands with fixed drum supports for 60 liter up to 200 liter drums, completely galvanized. Tilted support onwards for easy drum emptying. Compact sump pallets Drum stands Drum carts CW 4, fire-galvanized, Article no. P65-1003-A CW 2, Article no. P65-2002-A WSP-1OS/W, Article no. P21-2406-A, with optional tension belt FB 2, Art. no. P21-1702-A, on optional base sump tray CW 4 FB 3, Art. no. P21-1703-A, on optional base sump tray CW 4 FB 1, Art. no. P21-1701-A, on optional base sump tray CW 2 Model CW 2 CW 4 Capacity, 200 liter drums 2 4 External dimensions W x D x H (mm) 1250 x 820 x 340 1325 x 1320 x 250 Sump capacity (l) 210 210 Max. load (kg) 500 1000 Weight (kg) 73 110 Article no., painted RAL 5015 P65-2002-A P65-2003-A Article no., fire-galvanized P65-1002-A P65-1003-A Model FB 1 FB 2 FB 3 Capacity 1 x 200 liter drum 2 x 200 liter drum 3 x 60 liter drum External dimensions W x D x H (mm) 600 x 650 x 415 1250 x 650 x 415 1250 x 650 x 415 Article no., fire-galvanized P21-1701-A P21-1702-A P21-1703-A 4 DIBt Berlin steel troughs guidelines TüV-Nord systems MVV TB Nr. C2.15.12 • • • • • • For the transport of water-endangering and flammable liquids Base sump tray made from 3 mm sheet steel Base sump tray according to WHG - Ü-sign according to StawaR Removable galvanized grid Corrosion protection by primer coating and painting or by fire-galvanization Equipped with 2 fixed and 2 swiveling castors and push bar as standard ✔ ✔ ✔ ✔ Model WSP-1 OS/W WSP-2 OS/W External dimensions W x D (mm) 800 x 860 800 x 1400 Height (without push bar) (mm) 525 405 Sump capacity (l) 220 220 Capacity, 200 liter drums (vertical) 1 2 Article no., painted P21-2406-A P21-2407-A Article no., fire-galvanized P21-1406-A P21-1407-A Accessory Article no. Tension belt Z50-1920-A Steel sumps LACONT GmbH Umwelttechnik
For storing and filling off hazardous substances from large containers Made from 3 mm sheet steel Base sump tray according to WHG - Ü-sign according to StawaR Support surface is a removable fire-galvanized grid Ground clearance 100 mm for fork-lift truck transport High corrosion resistance - with primer and painting or fire-galvanized With resistant PE-inserts available for all models for storing acids and alkalis Sump capacity 1000 liter Max. load 1500 kg/m2 • • • • • • • • • Sump pallets for 1000 liter containers Sump pallets for 1000 liter containers with filling stand WSP-KTC-OS, fire-galvanized, Article no. P21-1601-B WSP-KTC-AS, painted, Article no. P21-2603-B WSP-KTC-ZW, painted, Article no. P21-2602-B WSP-KTC-ZW-AS, painted, Article no. P21-2606-A 5 DIBt Berlin steel troughs guidelines TüV-Nord systems MVV TB Nr. C2.15.12 DIBt Berlin steel troughs guidelines TüV-Nord systems MVV TB Nr. C2.15.12 ✔ ✔ ✔ ✔ Model WSP-KTC-OS WSP-KTC-ZW Dimensions W x D x H (mm) 1300 x 1360 x 790 2680 x 1300 x 480 Sump capacity (l) 1000 1000 Max. load (kg/m2) 1500 1500 Article no., painted P21-2601-B P21-2602-B Article no., fire-galvanized P21-1601-B P21-1602-B Model WSP-KTC-AS WSP-KTC-ZW-AS Dimensions W x D x H (mm) 1300 x 1360 x 1070 2620 x 1400 x 745 Filling stand dimensions W x D x H (mm) 1300 x 1100 x 320 2 x 1300 x 1100 x 320 Sump capacity (l) 1000 1000 Max. load (kg/m2) 1500 1500 Article no., painted P21-2603-B P21-2606-A Article no., fire-galvanized P21-1603-B P21-1606-A Steel sumps LACONT GmbH Umwelttechnik
PE sumps 60 liter drum 200 liter drum • • • Designed for placing flat on the floor, on euro-pallets or worktables and benches PE perforated plate Available without PE perforated plate for direct storage of containers For storing small containers and canisters: PE sumps For storing small containers and canisters: For storing 200 liter drums: PE drum stands PE-60, without PE perforated plate, Art. no. P70-2008-A PE-60/F, with ground clearance, with PE perforated plate, Art. no. P70-2013-A PE-40, with PE perforated plate, Art. no. P70-2005-A PE-30, with PE perforated plate, Art. no. P70-2003-A PE-20, without PE perforated plate, Art. no. P70-2002-A PE-100, with PE perforated plate, Art. no. P70-2009-A PE-200-5, Art. no. P70-2024-A FB 1-Combi*, with 200 liter drum, Article no. P70-2031-A FB 2-Combi*, Article no. P70-2033-A, e.g. 1x 200 liter drum and 1x 60 liter drum Model FB 1-Combi FB 2-Combi External dimensions W x D x H (mm) 580 x 500 x 380 1160 x 500 x 380 Capacity 1 x 60 or 1 x 200 liter drum 2 x 60 or 2 x 200 liter drum Article no. P70-2031-A P70-2033-A 6 DIBt Berlin Approval-No.: Z-40.22-485 General Technical Approval DIBt Berlin Approval-No.: Z-40.22-485 General Technical Approval DIBt Berlin Approval-No.: Z-40.22-380 General Technical Approval • • • • • • Designed for placing flat on the floor, on euro-pallets or worktables and benches PE perforated plate Available without PE perforated plate for direct storage of containers Available with PE perforated plate or without PE perforated plate for placing directly on euro-pallets For horizontal storage of steel drums (60 liter or 200 liter capacity) 1-drum- and 2-drum models made of black PE ✔ ✔ ✔ ✘ Model PE-10 PE-20 PE-30 PE-40 PE-60 PE-60/F External dimensions W x D x H (mm) 400 x 300 x 155 600 x 400 x 155 805 x 405 x 155 800 x 600 x 155 1000 x 600 x 175 1000 x 600 x 265 Sump capacity (l) 10 20 30 40 60 60 Max. load (kg) 50 50 50 100 200 200 Article no., without PE grid P70-2012-A P70-2002-A P70-2004-A P70-2006-A P70-2008-A P70-2014-A Article no., with PE grid P70-2011-A P70-2001-A P70-2003-A P70-2005-A P70-2007-A P70-2013-A Model PE-100 Model PE-200-5 External dimensions W x D x H (mm) 1200 x 800 x 175 Sump capacity (l) 100 Max. load (kg) 200 Article no., without PE grid P70-2010-A Article no., with PE grid P70-2009-A External dimensions W x D x H (mm) 1310 x 910 x 380 Sump capacity (l) 230 Capacity, 200 liter drums 2 Max. load (kg) 500 Article no., with PE perforated plate P70-2025-A Article no., without PE perforated plate P70-2024-A • • For storing water-endangering and aggressive media Rotationally-molded body of black PE 1 1 2 3 3 2 * Sump trays are not included in the scope of delivery! LACONT GmbH Umwelttechnik
PE sumps For storing water-endangering and aggressive media Rotationally-molded body of black PE Circumferential stabilizing ribs ensure high load values Ground clearance for internal transport Colour: black PE with PE perforated plate Colour: black PE without PE perforated plate (only PE-KT-1) or with PE perforated plate PE-AV-1 and PE-AV-1S for single station PE-AV-2 for double station • • • • • • • • • • For storing 200 liter drums: PE sumps PE sumps for KTC / IBC storage: Filling unit for collecting drip losses: with integrated filling stand: 7 DIBt Berlin Approval-No.: Z-40.22-380 General Technical Approval DIBt Berlin Approval-No.: Z-40.22-380 General Technical Approval DIBt Berlin Approval-No.: Z-40.22-451 General Technical Approval ✔ ✔ ✔ ✘ Model PE-200-1 PE-200-2 PE-200-4 PE-200-3 PE-200-4L External dimensions W x D x H (mm) 1000 x 680 x 600 1300 x 750 x 440 1380 x 1290 x 280 1380 x 1290 x 480 2445 x 660 x 270 Sump capacity (l) 225 236 242 485 220 Capacity, 200 liter drums 1 2 4 4 4 Max. load (kg) 250 500 1000 1000 1000 Article no., with PE perforated plate P70-2020-A P70-2021-A P70-2022-A P70-2026-A P70-2023-A Model PE-200-AB Model PE-KT-2S Suitable filling unit PE-AV-2 External dimensions W x D x H (mm) 1375 x 1350 x 635 Sump capacity (l) 450 Capacity, 200 liter drums 2 Max. load (kg) 500 Article no. P70-2027-A Model PE-KT-1 PE-KT-1S PE-KT-2 Suitable filling unit PE-AV-1 PE-AV-1S PE-AV-2 External dimensions W x D x H (mm) 1450 x 1450 x 1000 1700 x 1700 x 710 2450 x 1450 x 575 Sump capacity (l) 1100 1100 1100 Capacity, KTC / IBC 1 1 2 Max. load (kg) 2000 2000 4000 Article no., without PE perforated plate P70-2042-A - - Article no., with PE perforated plate P70-2040-A P70-2043-A P70-2041-A Article no. P70-2035-A P70-2037-A P70-2036-A External dimensions W x D x H (mm) 2300 x 1360 x 575 Sump capacity (l) 1200 Capacity, KTC / IBC 2 Max. load (kg) 3000 Article no., without PE perforated plate P70-2044-A Article no. P70-2036-A 1 2 3 3 4 4 4 1 3 2 LACONT GmbH Umwelttechnik PE-200-4, with PE perforated plate, Art. no. P70-2022-A PE-200-2, with PE perforated plate, Art. no. P70-2021-A PE-200-AB, with integrated filling stand, Art. no. P70-2027-A PE-KT-2S, without PE perforated plate, Art. no. P70-2044-A, with filling unit PE-AV-2, Art. no. P70-2036-A PE-AV-1, Art. no. P70-2035-A PE-AV-2, Art. no. P70-2036-A PE-AV-1S, Art. no. P70-2037-A PE-KT-2, with PE perforated plate, Art. no. P70-2041-A PE-KT-1, without PE perforated plate, Art. no. P70-2042-A PE-200-4L, with PE perforated plate, Art. no. P70-2023-A
Room linings made from steel • • • • • • • • • For the storage of water-endangering and flammable liquids Made from 3 mm sheet steel Base sump tray according to WHG - Ü-sign according to StawaR Individual segments can be combined with each other optionally With removable heavy-duty fire-galvanized grids Galvanized for high corrosion protection Wheel load 450 kg Max. load 5000 kg/m2 Element height 123 mm PE floor safety elements on request ! Floor safety elements 8 DIBt Berlin steel troughs guidelines TüV-Nord systems MVV TB Nr. C2.15.12 ✔ ✔ ✔ ✔ Model BS 05.05 / 123 BS 10.05 / 123 BS 20.05 / 123 BS 25.05 / 123 Base area W x D (mm) 500 x 500 1000 x 500 2000 x 500 2500 x 500 Sump capacity (l) 20 40 85 100 Weight (kg) 28 52 104 125 Article no., galvanized P25-1240-B P25-1241-B P25-1246-B P25-1242-B Accessories Element connector Type VB 047 VB 097 VB 20 VB 25 Dimensions W x D (mm) 52 x 470 52 x 970 52 x 1970 52 x 2470 Article no., galvanized P25-1250-B P25-1251-B P25-1252-B P25-1253-B Accessories Edge clips and cross connectors Type RK 123 KK 123 Dimensions W x D (mm) 100 x 30 120 x 120 Article no., galvanized P25-1254-B P25-1255-B Accessories Drive-on ramps Drive-on corners Type AF 05 / 123 AF 10 / 123 AF 20 / 123 AF 25 / 123 AE 123 Base area W x D (mm) 450 x 1150 950 x 1150 1950 x 1150 2450 x 1150 1150 x 1150 Weight (kg) 41 69 141 175 39 Article no., galvanized P25-1260-B P25-1261-B P25-1262-B P25-1263-C P25-1264-B Model BS 10.10 / 123 BS 20.10 / 123 BS 25.10 / 123 Base area W x D (mm) 1000 x 1000 2000 x 1000 2500 x 1000 Sump capacity (l) 80 160 210 Weight (kg) 83 162 201 Article no., galvanized P25-1243-B P25-1244-B P25-1245-B Element connector Cross connector Edge clip Drive-on corner Drive-on ramp LACONT GmbH Umwelttechnik
Hazardous substances shelving units For storing small containers All shelving parts and sump tray shelves galvanized Base sump tray according to WHG - Ü-sign according to StawaR Height-adjustable shelves at intervals of 25 mm Max. load per storage level 200 kg with uniformly distributed load Max. unit load 1.200 kg Dismounted delivery for easy self-assembly Base sump tray 3 mm sheet steel as lowest storage level 3 resp. 4 x sump tray shelves, galvanized Base sump tray 3 mm sheet steel as lowest storage level 3 resp. 4 x galvanized grid-type shelves Sump capacity 30 liter (KG-GR 100) resp. 35 liter (KG-GR 130) Base sump tray 3 mm sheet steel as lowest storage level available painted in RAL 5015 - sky blue or fire-galvanized – sump capacity 210 liter KG-GR 100 / 130 W: KG-GR 100 / 130 G: GR1-G / GR2-G: • • • • • • • • • • • • • Hazardous substances shelving units for small containers 9 DIBt Berlin steel troughs guidelines TüV-Nord systems MVV TB Nr. C2.15.12 ✘ ✘ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✘ ✔ ✔ Model KG-GR 100 / 5W KG-GR 130 / 5W For water-endangering substances For water-endangering and flammable liquids For water-endangering and flammable liquids Model KG-GR 100 / 5G KG-GR 130 / 5G External dimensions W x D x H (mm) 1060 x 635 x 2000 1360 x 635 x 2000 Lowest storage level fittings 1 x base sump tray, galvanized 1 x base sump tray, galvanized Other storage level fittings 4 x sump tray shelves, galvanized 4 x sump tray shelves, galvanized Sump capacity (l) 5 x 30 5 x 35 Article no., basic unit R71-2101-D R71-2103-D External dimensions, extension unit W x D x H (mm) 1010 x 635 x 2000 1310 x 635 x 2000 Article no., extension unit R71-2102-D R71-2104-D External dimensions W x D x H (mm) 1060 x 635 x 2000 1360 x 635 x 2000 Lowest storage level fittings 1 x base sump tray, galv. 1 x base sump tray, galv. Other storage level fittings 4 x grid shelves, galv. 4 x grid shelves, galv. Sump capacity (l) 1 x 30 1 x 35 Article no., basic unit R71-2110-D R71-2112-D Ext. dim., extension unit W x D x H (mm) 1010 x 635 x 2000 1310 x 635 x 2000 Article no., extension unit R71-2111-D R71-2113-D Accessory Article no. Article no. Additional PE sump tray shelf R71-2170-A R71-2171-A Model GR1-5GE GR2-5GE External dimensions W x D x H (mm) 1060 x 635 x 2100 2085 x 635 x 2100 Sump pallet dimensions W x D x H (mm) 1250 x 820 x 340 2400 x 820 x 240 Fittings 5 x grid shelves 2 x 5 grid shelves Sump capacity (l) 210 210 Art. no., sump pallet painted R71-2061-C R71-2081-C Art. no., sump pallet fire-galvanized R71-1061-C R71-1081-C GR2-5GE, sump pallet painted, Art. no. R71-2081-C KG-GR 100 / 5G, Art. no. R71-2110-D KG-GR 100 / 5W, Art. no. R71-2101-D KG-GR 130 / 5W, basic unit, Art. no. R71-2103-D and KG-GR 100 / 5W, extension unit, Art. no. R71-2102-D GR1-5GE, sump pallet fire-galvanized, Art no. R71-1061-C water-endangering liquids GHS Categorie 1-4 water-endangering liquids GHS Categorie 1-4 flammable liquids GHS Categorie 1-3 Fittings with sump tray shelves suitable for storing of Fittings with grid shelves suitable for storing of • • • 1 2 1 2 2 LACONT GmbH Umwelttechnik
Chemicals cabinets • • • • • • • • Single-wall body made from high-quality powdercoated sheet steel in RAL 7035 - light grey, 4 door colors available - at no extra charge Door(s) with central cylinder lock Ventilation slots in the door(s) Tray-shaped shelves - non-tilt, max. load 50 kg / shelf - height-adjustable at intervals of 25 mm DN 80 ventilation connection for exhaust air extraction on cabinet roof, Types CS Eco exhaust air extraction on cabinet roof optionally available Marking according to ASR A1.3 3 tray-shaped shelves (EW), made from powdercoated sheet steel in RAL 7035 - light grey Base sump tray (AW), made from powder-coated sheet steel in RAL 7035 - light grey as per WHG - Ü-sign according to StawaR CHS 600 / CHS 950 / CHS 1200 For safe and regular storage of non-flammable hazardous substances and chemicals in workspaces Chemicals and poisons cabinets 10 DIBt Berlin steel troughs guidelines TüV-Nord systems MVV TB Nr. C2.15.12 Fachbetrieb nach WHG von der TÜV NORD Systems GmbH & Co. KG betreut ✔ ✔ ✔ ✘ Model CHS 600 CHS 950 CHS 1200 External dimensions W x D x H (mm) 600 x 570 x 1935 950 x 500 x 1950 1200 x 500 x 1950 Usable internal dimensions W x D x H (mm) 564 x 512 x 1890 910 x 440 x 1903 1160 x 440 x 1903 Sump capacity (l) AW 1 x 30 / EW 3 x 20 AW 1 x 30 / EW 3 x 20 AW 1 x 39 / EW 3 x 20 Door(s) 1 (DIN right) 2 2 Weight (kg) 58 76 100 Art. no., outer body+door(s): RAL 7035 - light grey B80-6134-A B80-6210-A B80-6212-A 1 1 RAL 7035 RAL 5015 RAL 1018 RAL 3000 4 door colors available - at no extra charge! Model CS Eco 640 P CS Eco 1000 P CS Eco 1200 P External dimensions W x D x H (mm) 640 x 400 x 1950 1000 x 400 x 1950 1200 x 400 x 1950 Internal dimensions W x D x H (mm) 638 x 375 x 1840 998 x 375 x 1840 1198 x 375 x 1840 Sump capacity (l) BW 1 x 20 / EW 3 x 20 BW 1 x 20 / EW 3 x 20 BW 1 x 30 / EW 3 x 20 Door(s) 1 (DIN right) 2 2 Weight (kg) 52 70 83 Art. no., outer body: RAL 7016 - anthrazit grey, door(s) RAL 1018 - zinc yellow B80-6564-A B80-6565-A B80-6566-A CHS 950, doors RAL 7035 Art. no. B80-6210-A CS Eco 640 P, Art. no. B80-6564-A CHS 1200, doors RAL 7035 Art. no. B80-6212-A CS Eco 1000 P, Art. no. B80-6565-A Accessories Article no. Article no. Article no. Tray-shaped shelf, galvanized B80-6567-A B80-6568-A B80-6569-A 2 • • • Single-wall body made from high-quality powder-coated sheet steel in RAL 7016 - anthrazit grey, door(s) in RAL 1018 - zinc yellow 3 tray-shaped shelves (EW), galvanized Base tray (BW), galvanized CS Eco 640 P / CS Eco 1000 P / CS Eco 1200 P 2
Chemicals cabinets • • • • • • 3 x tray-shaped shelves (EW) whole construction tested and approved Fire resistance capability of >30 minutes for the small safety cabinet (Type 30 as per DIN EN 14470-1) Base sump tray (BW) sump capacity 11 liters, as per WHG - Ü-sign according to StawaR Doors with central cylinder lock Ground connection in accordance with TRBS 2153 (avoidance of ignition sources) Chemicals and poisons cabinets with safety box: Additionally also suitable for storage of flammable liquids CHS 950 / SiB 30 / CHS 950 GL / SiB30 Chemicals and poisons cabinets 11 DIBt Berlin steel troughs guidelines TüV-Nord systems MVV TB Nr. C2.15.12 ✔ ✔ ✔ ✔ 30 Model CHS 950 / SiB 30 CHS 950 GL / SiB 30 External dimensions W x D x H (mm) 950 x 500 x 1950 950 x 500 x 1950 Internal dimensions W x D x H (mm) 862 x 467 x 1240 862 x 467 x 1240 Sump capacity (l) (EW / BW) 3 x 20 / 1 x 11 3 x 20 / 1 x 11 Doors 2 2 (acrylic glass doors) Weight (kg) 145 145 Art. no., outer body:+doors: RAL 7035 - light grey B80-6207-A B80-6214-A 1 1 • • • Single-wall body made from high-quality powder-coated sheet steel in RAL 7016 - anthrazit grey, doors in RAL 1018 - zinc yellow 6 shelves, galvanized 2 base sump tray (AW), galvanized Chemicals and poisons cabinets with sliding doors: CHS 1500 ST-P / CHS 2000 ST-P Fachbetrieb nach WHG von der TÜV NORD Systems GmbH & Co. KG betreut ✔ ✔ ✔ ✘ CHS 1500 ST-P, Art. no. B80-6576-A CHS 950 / SiB 30, doors RAL 7035 Art. no. B80-6207-A CHS 950 GL / SiB 30, doors RAL 7035 Art. no. B80-6214-A CHS 2000 ST-P, Art. no. B80-6577-A Model CHS 1500 ST-P CHS 2000 ST-P Accessories Article no. Article no. External dimensions W x D x H (mm) 1500 x 500 x 1950 2000 x 500 x 1950 Internal dimensions W x D x H (mm) 1180 x 430 x 1880 1480 x 430 x 1880 Sump capacity (l) AW 2 x 30 AW 2 x 30 Sliding doors 2 2 Weight (kg) 123 160 Outer body: RAL 7016 - anthrazit grey Article no., doors: RAL 1018 - zinc yellow B80-6576-A B80-6577-A Shelf, galvanized B80-6578-A B80-6579-A 2 2 RAL 7035 RAL 5015 RAL 1018 RAL 3000 4 door colors available - at no extra charge!
Hazardous substances cabinets type 90 • • • • • • • • • • • • • • • Whole construction tested and approved by an authorized materials testing institute as per DIN EN 14470-1 (type 90) with a fire resistance > 90 minutes GS-approved safety (GS-sign) Outer body made from powder-coated sheet steel, RAL 7035 - light grey Door(s) either in RAL 7035 - light grey or RAL 1007 - daffodil yellow Insulation according to DIN 4102 Shelves height-adjustable at intervals of 64 mm, max. load 75 kg / shelf Automatic thermal closing mechanism if fire occurs DN 80 ventilation connection for exhaust air extraction Operation complies with TRGS 510 Ground connection in accordance with TRBS 2153 (avoidance of ignition sources) SiS Type 90 / 600 door hinged right as standard (door hinged left on request) Approved for storage of flammable liquids at the workplace as per DIN EN 14470-1 (type 90) and TRGS 510, annex 1 door hold-open device 1 x base sump tray as per WHG - Ü-sign according to StawaR with sump capacity: - SiS Type 90 / 600: 22 liter - SiS Type 90 / 900: 29 liter - SiS Type 90 / 1200: 33 liter - SiS Type 90 / 1400: 34 liter 1 x perforated base tray cover as 1st storing level 3 x shelves With inner fittings: Hazardous substances cabinets type 90 12 ✔ ✔ ✔ ✔ 90 Model SiS Type 90 / 600 SiS Type 90 / 900 Model SiS Type 90 / 1200 SiS Type 90 / 1400 External dimensions W x D x H (mm) 595 x 598 x 1935 900 x 598 x 1935 Internal dimensions W x D x H (mm) 492 x 430 x 1700 797 x 430 x 1700 Doors 1 (DIN right) 2 Weight (kg) 306 395 Outer body: RAL 7035 - light grey Material inner fittings Article no., door(s): RAL 7035 - light grey sheet steel B80-2000-D B80-2519-B Article no., door(s): RAL 1007 - daffodil yellow sheet steel B80-2100-G B80-2521-G External dimensions W x D x H (mm) 1190 x 598 x 1935 1400 x 598 x 1935 Internal dimensions W x D x H (mm) 1087 x 430 x 1700 1297 x 430 x 1700 Doors 2 2 Weight (kg) 505 615 Outer body: RAL 7035 - light grey Material inner fittings Article no., door(s): RAL 7035 - light grey sheet steel B80-2002-D B80-2701-B Article no., door(s): RAL 1007 - daffodil yellow sheet steel B80-2102-G B80-2703-G SiS Type 90 / 600, Art. no. B80-2100-G, door RAL 1007 - daffodil yellow SiS Type 90 / 900, Art. no. B80-2521-G, doors RAL 1007 - daffodil yellow SiS Type 90 / 1200, Art. no. B80-2102-G, doors RAL 1007 - daffodil yellow SiS Type 90 / 1400, Art. no. B80-2701-B, doors RAL 7035 - light grey
Accessories hazardous substances / drum cabinets type 90 Extraction fans model 1 + 9: For mounting directly on the storeLAB® safety cabinet Extraction fans model 4 + 8: Plug-in versions for mounting on safety cabinet with earthed plug and 2 m connection cable Easy extraction fan connection (suction side) with DN 80 flexible aluminum tubing Model 8: - Extraction fan operation checked by monitoring the air flow - Acoustic message if extraction fan stops working or safety cabinet ventilation slots become blocked Suitable for the operation of storeLAB® safety cabinets according to DIN EN 14470-1 in recirculation mode. No complex and cost-intensive exhaust air ducting to the outside necessary! Permanent filtering of the exhaust air Warning message in case of heavy contamination (dust, etc.) or filter saturation by hydrocarbons Due to the tandem filter technology, a further operation of approx. 14 days is possible even after saturation of the main filter (subsequent replacement of the filter is necessary in order to ensure continued proper operation!) Connection by means of Schuko plug Spatial separation from flammable liquids Door with cylinder lock Powder-coated sheet steel in RAL 7035 - light grey With installation accessories for fixing in position, standing on shelf For storage of small amounts of toxic and very toxic substances in storeLAB® safety cabinets • • • • Safe compartments Extraction fans Hazardous substances filter attachment 13 • • • • • • • • • • Connection work to be done by customer! Model SF 1 SF 2 External dimensions W x D x H (mm) 447 x 370 x 436 1000 x 370 x 436 Door(s) 1 2 Article no. B80-2517-B B80-2518-B SF 1, RAL 7035, Article no. B80-2517-B SF 2, RAL 7035, Article no. B80-2518-B Installation example: Models 1 + 9 Installation example: Models 4 + 8 Description Model 1 Model 9 Model 4 Model 8 EX-proof NO YES NO NO Electricity supply 230 V 230 V 230 V 230 V Weight (kg) 6,0 6,0 7,5 7,5 Article no. B80-2839-A B80-2847-A B80-2842-A B80-2843-A Description Article no. Technical data Hazardous substances filter attachment GFA Basic B80-2880-A Attachment adapter for storeLAB® type 90 cabinets B80-2883-A Attachment adapter for storeLAB® CHS 950 / SiBox B80-2885-A Attachment adapter for storeLAB® SiS-FAS type 90 / 900 B80-2884-A Attachment adapter for storeLAB® SiS-FAS type 90 / 1550 included Housing: Powder-coated sheet steel, RAL 7035 - light grey External dimensions (W x D x H): 310 mm x 510 mm x 210 mm Motor performance: 0,03 kW Nominal voltage: 230 V Frequency: 50 Hz Current consumption: 0,2 A Noise level: < 42 dB (A) Net weight (without filter): 10 kg Weight of active charcoal filter: 3 kg Volume flow (at cabinet): 25 m3/h
Model SiS-FAS Type 90 / 1550-CW SiS-FAS Type 90 / 1550-EW Hazardous substances drum cabinets type 90 • • • • • • • • • • • • Whole construction tested and approved by an authorized materials testing institute as per DIN EN 14470-1 (type 90) with a fire resistance >90 minutes Outer body from powder-coated sheet steel in RAL 7035 - light grey, Doors RAL 1007 - daffodil yellow Insulation according to DIN 4102 Automatic thermal closing mechanism if fire occurs DN 80 ventilation connection for exhaust air extraction on cabinet roof Operation complies with TRGS 510 Ground connection in accordance with TRBS 2153 For storage of flammable liquids of GHS category 1-3 directly at the workplace door hold-open device Base sump tray made from 3 mm sheet steel, painted in RAL 7035 - light grey, as per WHG - Ü-sign according to StawaR with grid with base socles 100 mm (for transport by fork-lift trucks, etc.), easily removable without base socles With inner fittings: Base sump tray CW: Base sump tray EW: All shelving fittings galvanized Max. load per storage level 200 kg Drum cabinets with shelvings for small containers and canisters: • • Hazardous substances drum cabinets type 90 14 ✔ ✔ ✔ ✔ Model SiS-FAS Type 90 / 900-EW External dimensions W x D x H (mm) 900 x 900 x 1935 Internal dimensions W x D x H (mm)* 797 x 735 x 1290 Doors 2 Capacity 200 liter drum, standing 1 Sump capacity of base sump tray (l) 220 Weight (kg) 535 Art. no., outer body: RAL 7035 - light grey, doors: RAL 1007 - daffodil yellow B80-2863-A Accessories Article no. Accessories Article no. Grid, max. load 75 kg B80-2873-A Socle, tested acc. to type 90 cabinets W x D x H (mm) = 900 x 900 x 113 B80-2713-A Grid, W x D (mm) = 1445 x 500, max. load 75 kg B80-2852-A Socle, tested acc. to type 90 cabinets W x D x H (mm) = 1550 x 1025 x 113 B80-2714-A * from upper edge of base sump tray * from upper edge of base sump tray SiS-FAS Typ 90 / 900-EW, Article no. B80-2863-A SiS-FAS Type 90 / 1550 KG-GR, Art. no. B80-2857-A SiS-FAS Type 90 / 1550-CW, Article no. B80-2850-A, with optional grid for storing small containers External dimensions W x D x H (mm) 1550 x 1025 x 2200 1550 x 1025 x 2200 Internal dimensions W x D x H (mm)* 1450 x 870 x 1645 1450 x 870 x 1745 Doors 2 2 Capacity 200 liter drum, standing 2 2 Sump capacity of base sump tray (l) 220 220 Weight (kg) 1030 1030 Art. no., outer body: RAL 7035 - light grey, doors: RAL 1007 - daffodil yellow B80-2850-A B80-2851-A DIBt Berlin steel troughs guidelines TüV-Nord systems MVV TB Nr. C2.15.12 Fachbetrieb nach WHG von der TÜV NORD Systems GmbH & Co. KG betreut Model SiS-FAS Type 90 / 1550 KG-GR External dimensions W x D x H (mm) 1550 x 1025 x 2200 Internal dimensions W x D x H (mm) 1450 x 870 x 1955 Doors 2 Type of lowest storage level Base sump tray Other storage levels 4 x grid-type shelves Sump capacity of base sump tray (l) 80 Weight (kg) 1000 Art. no., outer body: RAL 7035 - light grey, doors: RAL 1007 - daffodil yellow B80-2857-A Accessories Article no. Additional grid storage level B80-2858-A Socle, tested acc. to type 90 cabinets W x D x H (mm) = 1550 x 1025 x 113 B80-2714-A Socle, optional 90 1 2 3 1 2 2 3
Battery concrete cabinet BBS ✔ ✔ ✔ ✔ • • • • • • • • • • • • • • • • • • • For safe storage of lithium-ion batteries 15 Model BBS Accessories Article no. External dimensions W x D x H (mm) 1500 x 910 x 2314 Internal dimensions W x D x H (mm) 1100 x 630 x 1600 Adjustable storage levels 4 Dimensions per storage level W x D x H (mm) 1000 x 500 x 280 Max. load per storage level (kg) 100 Weight (kg) 2850 Article no. C62-2015-B Exterior painting, white C62-2016-B Additional grid shelf as storage level C62-2017-B Fire protection cable bushing C62-2018-B Fire alarm incl. potential-free contact and external switch box C62-2019-B Charging device with socket strip 5-fold in each storage level (4 levels) C62-2020-B Aerosol extinguishing system C62-2021-B Battery concrete cabinet BBS Concrete cabinet made of prefabricated reinforced concrete parts with a fire resistance class F90 Water impermeable concrete C 35/45 according to EN 206-1, XC4, XD1, XF1, XA1 Visible sides smooth, all visible edges chamfered Roof pitch to rear wall with drip edge For forklift transport 2 x 220 x 100 mm entry opening for forklift forks Requirements for the installation surface - A soil load of at least 26 kN/m² must be demonstrated - Floor accuracy according to DIN 18202, table 3, line 3 Anchoring to the ground is not necessary, the BBS stands firmly on the ground by its own weight Connection of the earthing to existing foundation or depth earth electrodes In accordance with the general technical approval of the DIBt Berlin Lockable With additional wedge lever lock Opening angle of door: 130° Galvanized and additionally painted Base sump pallet made from 3 mm galvanized sheet steel Liquid-tight welded according to WHG - Ü-sign according to StawaR Sump capacity 30 liter Ceiling plate with opening and pressure relief dome With gas management incl. fleece mat for filtering the harmful gases in case of accident 4 grid shelf storage levels, adjustable Technical description concrete body: Customer services: T90-1 fire protection door BRM 1100 x 1600 mm: Design of sump pallet: Pressure release: Storage levels: Hazards in handling with lithium-ion batteries ---> Thermal Runaway Mechanical damage Electrical overload Thermal overload Smoke Fire Explosion in combination with the high energy density of the battery when loading and discharging the battery through extreme heat or energy sources BBS, Article no. C62-2015-B, with optional exterior painting So that you are safe! According to the ADR*, lithium-ion batteries are classified as class 9 dangerous goods and are thus classified as particularly critical. Safe storage with regard to fire, smoke and explosion as well as fire-resistant separation from other areas is therefore essential. *Regulations for the transport of dangerous goods Concerning the real test of the storage cabinet guidance was made regarding standards of ADR: - It was observed that the battery concrete cabinet has completely fufilled its protection goals - Temperature on the outside of the storage cabinet has never been exceeded at any time, i.e. temperature T = 100°C - There was no flame failure. Furthermore, there was no leakage of solid parts referring to the storage cabinet indicated by detectors - The review of HF-measurement revealed that there was no critical hydrogen fluoride concentration (pressure release with integrated gas management) indicated by detector. Wedge lever lock Aerosol extinguishing system Charging device with socket strip 5-fold LACONT GmbH Umwelttechnik Explosion test BAM Berlin Product video: Lithium-ions safety storage in LaCont Battery Concrete Cabinet BBS FIRE RESISTANCE F90 Utility model protection DBGM20 2023101699
Safety storehouses • • • • • • • • • • • • • • The safety storehouse is a proved, favorably priced mobile outdoor storage facility for hazardous substances. It can be transported unloaded at any time using a fork-lift truck or crane. Thanks to its modular design there are different types for selection. This allows the system to be optimally adapted to suit the user’s actual requirements. If equipped with shelving the safety storehouse is ideally suited for use as a walk-in store for small containers. For the outdoor storage of water-endangering hazardous substances Made from 3 mm fire galvanized sheet steel, as per WHG - Ü-sign according to StawaR Max. load 1000 kg/m2, higher loads on request Ground clearance 100 mm Made from specially profiled galvanized sheet steel Reinforced roof and base profile frames Circumferential splash protection made from sheet steel, except in door area Galvanized steel double door with ventilation slots, 1750 mm wide, lockable with safety lock Built-in weather-protected ventilation slots in door and opposite rear panel Lifting attachments for cranes as standard Mounted delivery The legally required 0.4-fold minimum air exchance rate is achieved by continuous ventilation slots directly above the base sump tray and ventilation slots in the upper area of back wall and door. Ground connection to avoid dangerous electrostatic charges Double door either on the long or short side (not for type SLH-NB 1 x 2) Mounted delivery Base sump tray with grid support: Special container construction: For the passive outdoor storage of flammable liquids Rate of air exchange has been tested and approved in accordance with the latest requirements of DIBt Berlin Safety storehouses Safety storehouses with natural ventilation 16 ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ SLH 1 x 2, galvanized, Article no. H61-2101-B, with optional shelving Model SLH 1 x 2 SLH 2 x 2 SLH 3 x 2 SLH 6 x 3 Model SLH-NB 1 x 2 SLH-NB 2 x 2 SLH-NB 3 x 2 SLH-NB 6 x 3 External dimensions W x D x H (mm) 2075 x 1075 x 2385 2075 x 2075 x 2385 3075 x 2075 x 2385 6075 x 2875 x 2385 Internal dimensions W x D x H (mm) 1980 x 980 x 1970 1980 x 1980 x 1970 2980 x 1980 x 1970 5980 x 2780 x 1970 Sump capacity (l) 310 660 1200 2 x 1500 Article no., galvanized H61-2101-B H61-2102-B H61-2103-B H61-2110-C Article no., galvanized and exterior painted H61-6101-B H61-6102-B H61-6103-B H61-6110-C External dimensions W x D x H (mm) 2075 x 1075 x 2570 2075 x 2075 x 2570 3075 x 2075 x 2570 6075 x 2875 x 2570 Internal dimensions W x D x H (mm) 1980 x 980 x 2150 1980 x 1980 x 2150 2980 x 1980 x 2150 5980 x 2780 x 2150 Sump capacity (l) 310 660 1200 2 x 1500 Article no., galvanized H63-1100-A H63-1101-A H63-1102-A H63-1109-C Article no., galvanized and exterior painted H63-2100-A H63-2101-A H63-2102-A H63-2109-C SLH-NB 3 x 2, galvanized, Art. no. H63-1102-A, with optional ramp Our standard - double door and lifting attachments for cranes! LACONT GmbH Umwelttechnik Other sizes from 10 to 40 m2, contact us, we will be happy to advise you!
Safety storehouses ✔ ✔ ✔ ✔ Mounted delivery Safety storehouse insulation: insides of all walls, roof and doors fitted with 60 mm thick, non-flammable insulation material Insulation of base sump tray optional Heating according to size and required interior temperature Circumferential splash protection made from sheet steel, except in door area With ground connection to avoid dangerous electrostatic charges For the storage of flammable liquids a forced ventilation system is required. For the outdoor and frost-free storage of water-endangering and flammable hazardous substances • • • • • • • Thermo safety storehouses Accessories for safety storehouses When equipped with ex-proof forced ventilation and exhaust air monitoring, the above-mentioned containers are also suitable for active storage of flammable substances. 17 DIBt Berlin Approval-No.: Z-38.5-171 General Technical Approval Model SLT 1 x 2 SLT 2 x 2 SLT 3 x 2 SLT 6 x 3 External dimensions W x D x H (mm) 2075 x 1075 x 2385 2075 x 2075 x 2385 3075 x 2075 x 2385 6075 x 2875 x 2385 Internal dimensions W x D x H (mm) 1840 x 910 x 1900 1840 x 1840 x 1900 2840 x 1840 x 1900 5840 x 2640 x 1900 Sump capacity (l) 310 660 1200 2 x 1500 Article no., galvanized H63-1000-A H63-1001-A H63-1002-A H63-1009-C Article no., galvanized and exterior painted H63-2000-A H63-2001-A H63-2002-A H63-2009-C SLT 3 x 2, galvanized, with special fittings and base sump tray insulation Accessories: Interior equipment Article no. Ramp dimensions L x W x H (mm) = 1200 x 1000 x 320 for drum cart H61-9007-D Accessories: Rack-Sets Article no. Grid rack set, galvanized, with 3 storage levels pre-mounted on container wall, Dimensions W x D (mm): 800 x 500* H61-9011-C Grid rack set, galvanized, with 3 storage levels pre-mounted on container wall, Dimensions W x D (mm): 1800 x 500* H61-9012-C Grid rack set, galvanized, with 3 storage levels pre-mounted on container wall, Dimensions W x D (mm): 2600 x 500** H61-9013-C Accessories: Electrical fittings (premounted) Article no. Technical forced ventilation ex-proof (wall ventilator) 230 V / 50 Hz H61-9006-C Technical forced ventilation ex-proof (tube fan) H61-9026-B Exhaust air monitoring incl. flow sensor and signal horn for alarming H61-9053-B Potential equalizing bar on the outside of the container as per DIN VDE H63-9031-A LED Moisture-proof lamp 230 V, 43 W, effective luminous flex 6000 lm H61-9009-E LED Lamp ex-zone II, 230 V, 40 W, effective luminous flex 6430 lm H61-9090-B LED Lamp ex-zone I, 230 V, 40 W, effective luminous flex 6290 lm H61-9091-B Optional ramp for drum cart Technical forced ventilation, ex-proof Grid rack set, galvanized, Art. no. H61-9012-C Electric heating, pre-mounted, incl. collision protection Heating, ex-proof, T3 2 kW / 230 V 3 kW / 230 V Convection heating, not ex-proof 2 kW / 230 V 3 kW / 230 V Frost-free storage*** for SLT type: 1 x 2 / 2 x 2 / 3 x 2 6 x 3 Article no., by using wall ventilator H63-9002-A H63-9003-A Article no., by using tube fan H63-9002-A H63-9009-A**** Frost-free storage*** for SLT type: 1 x 2 / 2 x 2 / 3 x 2 6 x 3 Article no. H63-9020-A H63-9080-A *** With base sump tray insulation **** 2 x 2 kW / 230 V * Load capacity 100 kg / level / ** Load capacity 150 kg / level Our standard - double door and lifting attachments for cranes! Electric heating, 2 kW, ex-proof Accessories for model SLT 1 x 2 SLT 2 x 2 SLT 3 x 2 SLT 6 x 3 Base sump tray insulation H63-1020-A H63-1021-A H63-1022-A H63-1029-A LACONT GmbH Umwelttechnik
Water protection compartment container • • • • • • • • • For the storage of water-endangering liquids of GHS category 1-4 and flammable liquids of GHS category 1-3. WSC-F/T-E.2-30 – with hinged doors WSC-F/T-E.2-60 – with sliding doors Meets all legal requirements for the storage of hazardous substances outdoors in accordance with regulations General technical approval (DIBt Berlin) for simplified approval procedure Lockable hinged or sliding doors Completely welded frame construction High corrosion protection due to priming and painting in RAL 5015 - sky blue WSC-F-E series with natural ventilation as standard (suitable for passive storage of flammable liquids) Series WSC-T-E as standard with thermal insulation for temperature-controlled storage (heating / cooling optional!) Installation on foundation provided by customer - foundation plan on request! For storage of 200 liter drums or palletized goods Water protection compartment container 18 ✔ ✔ ✔ ✔ DIBt Berlin Approval-No.: Z-38.5-122 General Technical Approval Model WSC-F-E.2-30 WSC-F-E.2-60 Model WSC-T-E.2-30 WSC-T-E.2-60 Number of levels 2 2 External dimensions W x D x H (mm) 3130 x 1450 x 3080 6200 x 1530 x 3080 Internal compartment dimensions W x D x H* (mm) 3010 x 1300 x 1250 3010 x 1300 x 1250 Sump capacity (l) 450 2 x 450 Capacity, 200 liter drums 20 directly on grid support 40 directly on grid support (examples) or 16 on chemical pallets or 32 on chemical pallets or 12 on euro-pallets or 24 on euro-pallets Art. no., with hinged doors C22-5014-C - Art. no., with sliding doors - C22-5114-C Number of levels 2 2 External dimensions W x D x H (mm) 3290 x 1560 x 3180 6360 x 1680 x 3180 Internal compartment dimensions W x D x H* (mm) 3010 x 1300 x 1250 3010 x 1300 x 1250 Sump capacity (l) 450 2 x 450 Capacity, 200 liter drums 20 directly on grid support 40 directly on grid support (examples) or 16 on chemical pallets or 32 on chemical pallets or 12 on euro-pallets or 24 on euro-pallets Art. no., with hinged doors C22-5013-T - Art. no., with sliding doors - C22-5113-T * Compartment dimensions and stated capacities without considering electrical installations (ventilation, lighting etc.) * Compartment dimensions and stated capacities without considering electrical installations (ventilation, lighting etc.) WSC-F-E.2-60, with sliding doors, Art. no. C22-5114-C WSC-T-E.2-60 in special version, with optional air conditioning WSC-F-E.2-30, with hinged doors, Art. no. C22-5114-C THERMO THERMO Accessory: Technical forced ventilation, for active storage of flammable liquids Our standard: natural ventilation and lifting attachments for cranes! LACONT GmbH Umwelttechnik
Water protection compartment container ✔ ✔ ✔ ✔ For storage of IBC/KTC‘s Technical forced ventilation Heating for frost-free storage Cooling and air conditioning PE-HD lining for storage also of aggressive media Increased collection volume Horizontal drum storage Container sizes up to 12 m length and up to three storage levels WSC-F/T-E.2-35 - with hinged doors WSC-F/T-E.2-70 - with sliding doors Accessories on request: • • • • • • • • Water protection compartment container 19 DIBt Berlin Approval-No.: Z-38.5-122 General Technical Approval Model WSC-F-E.2-35 WSC-F-E.2-70 WSC-T-E.2-35 WSC-T-E.2-70 Number of levels 2 2 2 2 External dimensions W x D x H (mm) 3500 x 1450 x 3660 7060 x 1530 x 3660 3660 x 1560 x 3670 7220 x 1680 x 3670 Internal compartment dimensions W x D x H* (mm) 3380 x 1300 x 1500 3380 x 1300 x 1500 3380 x 1300 x 1450 3380 x 1300 x 1450 Sump capacity (l) 1000 2 x 1000 1000 2 x 1000 Capacity, KTC / IBC 6 12 6 12 Art. no., with hinged doors C22-5218-C - C22-5218-T - Art. no., with sliding doors - C22-5234-C - C22-5234-T * Compartment dimensions and stated capacities without considering electrical installations (ventilation, lighting etc.) THERMO THERMO Filling container walk-in custom design External switchbox WSC-F-E.2-70, with sliding doors and natural ventilation, Article no. C22-5234-C WSC-F-E.2-35, with hinged doors and natural ventilation, Article no. C22-5218-C Our standard: natural ventilation and lifting attachments for cranes! Special designs e.g. with modified dimensions, higher sump capacity or other door designs on request! LACONT GmbH Umwelttechnik
Fire protection container F 90 steel • • • • • • Fire protection container with components according to DIN EN 13501 (EI 90) For the storage of drums with one-winged door and for the storage of KTC with one- or two-winged door(s), suitable for indoor and outdoor use Steel sumps as per WHG with grid cover Doors close automatically if fire occurs Outer body painted in RAL 7035 - light grey Wide range of accessories Fire protection container F 90 steel 20 ✔ ✔ ✔ ✔ External dimensions W x D x H (mm) 1720 x 1540 x 2325 1720 x 1840 x 2325 Internal dimensions W x D x H (mm) 1360 x 950 x 1900 1360 x 1250 x 1900 Sump capacity (l) 220 220 Capacity, 200 liter drums 2 on Euro pallet 4 on chemical pallet Art. no., door W x H (mm) = 1350 x 2000 (SD)* C64-4001-B C64-4002-B External dimensions W x D x H (mm) 1730 x 1840 x 2665 3270 x 1770 x 2480 Internal dimensions W x D x H (mm) 1360 x 1260 x 1900 2900 x 1300 x 1900 Sump capacity (l) 1000 1000 Capacity, KTC/IBC 1 2 Art. no., door W x H (mm) = 1350 x 2000 (SD)* C64-4003-B - Art. no., door W x H (mm) = 2900 x 2000 (DD)* - C64-4004-B Model WSC-Fass 2/F90 WSC-Fass 4/F90 Model WSC-KTC 1/F90 WSC-KTC 2/F90 WSC-KTC 2/F90, Art. no. C64-4004-B WSC-Fass 4/F90, Art. no. C64-4002-B Accessories Article no. Ex-proof forced ventilation C64-3116-A LED Lamp ex-zone II, 230 V, 15 W, effective luminous flex 2170 lm H61-9131-A Ex-proof heating 2 kW C64-3103-A Door hold-open device for single door C64-3106-A Door hold-open device for double door C64-3107-A Switch box C64-3114-A Potential equalizing bar C64-3113-A Ex-proof exhaust air monitoring with signal horn C64-3109-A Additional flashing horn H61-9089-B Ex-proof exhaust air monitoring with signal horn and door hold-open device Ex-proof exhaust fan incl. exhaust air monitoring FIRE BEHAVIOR - If fire occurs the door, door gaps, air in- and outlet slots are sealed hermetically - In versions with Thermolock system doors can be left open during the work process WSC-KTC 1/F90, Art. no. C64-4003-B Other designs and sizes on request! * SD = one-winged door, * DD = two-winged door DIBt Berlin steel troughs guidelines TüV-Nord systems MVV TB Nr. C2.15.12 Fachbetrieb nach WHG von der TÜV NORD Systems GmbH & Co. KG betreut EI 90 LACONT GmbH Umwelttechnik
Fire protection container F 90 concrete ✔ ✔ ✔ ✔ The LACONT concrete fire protection warehouse BBL F 90 meets all legal requirements for the storage of hazardous materials of all kinds, in particular also for the storage of flammable liquids. Body made of reinforced concrete grade C 35/45 Exterior walls with weatherproof paint white, interior walls with wipe-proof paint gray, ceiling slab (waterproof) with slope to the back wall incl. drip edge 2-wing T 90 gate, galvanized and additionally painted in RAL 5015 Pallet rack for storage of drums and IBC incl. sump tray Accessories on request: Door hold-open system for optimal loading Technical ventilation and ventilation modules for storage of flammable liquids Concrete fire protection warehouse for pallet storage: Field of application: • • • • • • Fire protection container F 90 concrete 21 DIBt Berlin Approval-No.: Z-38.5-247 General Technical Approval Model BBL-K 4 External dimensions W x D x H (mm) 3300 x 1980 x 3660 Internal dimensions W x D x H (mm) 2700 x 1350 x 2950 Sump capacity (l) 1100 Capacity, 1000 liter KTC/IBC 4 Article no. C62-2011-B Accessory Article no. Grid storage level, max. load 1500 kg/m2 C62-2013-B Our standard: Clear shelf height 1350 mm ! BBL are suitable for the storage of:: Water-endangering liquids of GHS category 1-4 Flammable liquids of GHS category 1-3 Toxic and very toxic substances Oxidizing substances Waste requiring supervision Organic peroxides • • • • • • BBL-K 4, Article no. C62-2011-B Fire resistance F 90 from inside and outside ! LACONT GmbH Umwelttechnik
www.lacont.deRkJQdWJsaXNoZXIy NzgwNTU=